Manufacturer of Quality Air Conditioning and Heating Products • www.islandaire.com • sales@islandaire.com • (800)-886-2759
40
System Controls and Management
USER INTERFACES
The Islandaire EZGS PTAC can be operated by several different control systems. Listed on this page are some of the
important control features and a brief description of their functions.
Remote Control
The unit can be conveniently operated with a battery
operated wireless remote control. All functions are
accessible through the remote control unit.
Figure 38
Remote Control
ON/OFF
°C/°F
MODE INDICATOR
FAN SPEED INDICATOR
CLOCK
TEMP
FAN SPEED SET
TIMER SET
HOUR ADJUST
TEMP INDICATOR
LOCK INDICATOR
TIMER DISPLAY
POWER
MODE
HOLD
MIN ADJUST
TIMER
°C/°F SET
General Operation
Press the On/Off button on the remote control.
Press the MODE button to select the desired operation
mode: Cool/Fan/Heat. Press the TEMP + or TEMP -
buttons to set desired temperature. Press the Fan Speed
button to set the desired air flow rate (high/med/low).
Setting the Clock
When new batteries are inserted, the default clock setting
is 00:00 A.M. To adjust the setting to the current time,
open the back cover and push the CLK button; the clock
display will blink. Use the HOUR and MIN buttons to
set the current time.
Then press the CLK button again and close the back
cover.
Digital Control Panel
The built-in digital control panel features an easy to
read digital display, large buttons and bright indicator
lights. Energy management and temperature limiting
preferences allow the owner to increase efficiency, limit
extreme usage and optimize performance.
Mechanical Control
Panel
Provides a familiar interface with solid state push buttons
and a temperature control knob.
Wall Thermostats
Terminal connections on the main control board allow
easy conversion from an on-board control panel to a wall
mounted thermostat control (wired or wireless).
See page 45 for full details.
Figure 39
Wall Thermostats
Front Desk Control
Low voltage terminals on the main control board allow
easy connection to a front desk energy management
system. Front desk controls allow the unit to be operated
from a remote location. Front desk controls can reduce
energy consumption by allowing front desk personnel to
turn the unit off when a room is vacant.
