ISKO KOCH GmbH, Egerländer Str. 28, 95448 Bayreuth
Instruction Manual page 14 to 21
ISKO KOCH GmbH, Egerländer Str. 28, 95448 Bayreuth
7
Starting the Standing Frame
Connect the power cable to a suitable supply and switch on the socket, the Frame is ready for use.
The additional forced switch-off is released, as long as the emergency stop push button, pos. 1 (see
chapter 4.2), is kept pressed. The Frame can be operated again, only after this emergency stop push
button has been released. Up- or downward movement of the Lift Chord is effected by pressing the
respective key of the manual control switch, pos. 16 (see chapter 4.2). The keys are marked with arrows
according to their functions (see chapter 4.2)
How to stand up using "DELTA 2004“
Set up the Standing Frame and fit the lifting harness as described earlier. Plug the lifting
mechanism into the electricity supply and check the unit is functioning by checking that the
green indicator light on the front of the unit is on. Press the 'down' arrow on the handset to
feed out the Lift Chord and connect them to the lifting harness. Press the ‘up’ button to
remove the slack from the Lift Chords before proceeding to lift.
The 'down' button on the handset will override the 'up' button. If the user or assistant
operating the handset wants the lifting mechanism to lower the user back to sitting, pressing
the 'down' button will lower the user, even if the 'up' button is still depressed.
The handset connection to the motor unit is on the side of the box on the front of the motor unit. If
the handset ever gets detached from the motor unit, it can be re-connected to the socket on the side
of the unit. If the handset is attached to either of the sockets on the front of the unit it will not work
and may cause damage to the motor.
If the user has sufficient arm and trunk control they can guide the lift to standing themselves. If
additional assistance is required, an appropriately trained person can assist the lift to standing. A
reassuring hold can be placed around the user's trunk to help guide them to vertical. In either case,
pressing the 'up' arrow on the handset takes up the slack in the Lift Chords and lifts the user's pelvis as
the knees are blocked against the knee supports. Once in a vertical position, the button can be released
to hold the position. A separate hip support unit can be fitted in position to provide more positive hip
control.
Always leave the lifting straps and harness in position when the user is standing.
To return the user to sitting, provide an appropriate level of support and press the 'down' button on
the handset. Guide them to a sitting position and release the button when the sitting surface is fully
Pic. 7.1
!
