ISKO KOCH GmbH, Egerländer Str. 28, 95448 Bayreuth
Instruction Manual page 19 to 21
ISKO KOCH GmbH, Egerländer Str. 28, 95448 Bayreuth
12
Disinfection
-
In order to ensure that the standing device functions properly, each ISKO standing frame
should be cleaned, disinfected and checked after each use so that it can be used again
immediately.
-
Incorrect cleaning/disinfection of the standing frame can cause hazards.
-
Depending on the degree of soiling, we recommend cleaning the standing device with a
damp cloth or similar.
-
For wipe and spray disinfection, disinfectants can be used in their intended concentration.
(see manufacturer's instructions)
-
The dilution ratio recommended by the manufacturers in the respective instructions for use
must be used.
Solvents are not permitted.
Abrasive materials or scouring sponges must not be used.
Specifications of detergents and disinfectants
- The working solutions should normally be used freshly prepared.
- Do not exceed or fall below the concentrations indicated.
- They must not contain corrosive or caustic components.
- They must not contain substances that alter the surface structure or the adhesion properties
of the materials.
-
Lubricants must not be attacked by the cleaning and disinfecting agent.
Under no circumstances should soap or washing-active substances be added to the
disinfectant. In the case of products containing alcohol, there is a risk of explosion and fire
when used over large areas.
The use of unsuitable detergents and disinfectants can cause damage to the surface coating
for which ISKO KOCH GmbH cannot be held liable.
13
Troubleshooting
Problem
Solution
1
The motor does not work, when the switch is
activated.
Make sure that the plug is firmly connected to the
electrical socket outlet.
Changes, readjustments and repairs to the Upright Helper that cannot be remedied in
accordance with the above instructions may only be carried out by the manufacturer directly
or by a workshop authorised by the manufacturer.
14
Recommended Accessories
Article
Order-No.
Thoracic support and laterals with head control unit; straight version
KR-631-X
