ISKO KOCH GmbH, Egerländer Str. 28, 95448 Bayreuth
Instruction Manual page 13 to 21
ISKO KOCH GmbH, Egerländer Str. 28, 95448 Bayreuth
Lifting Harness
The user should put on the belt before approaching the Standing Frame. The belt should be fastened
so that the bottom edge just touches the seat of the wheelchair. Then, the belt may be fastened around
the lower abdomen.
6
Approaching the Standing Frame
Once the above adjustments have been made and the lifting harness fitted, the user can be positioned
ready for the lift to standing. In all cases it is desirable for the user's thigh to be horizontal in the sitting
position with feet on the footboard.
The Delta should be positioned as close to the user as possible. The cut-outs in the footboard are
designed to receive the front wheels of a wheelchair.
Lock the castors on the Delta before using the DELTA. User's feet should be positioned on the
footboard with the velcro toe-straps used to help maintain position and their knees should be firmly
positioned against the knee supports. The DELTA is designed to accommodate larger wheelchairs by
using it’s retractable rear wheels. To adjust, loosen the threaded pin, pos. 8 (
pic. 6.1), adjust the rear
wheels outward as necessary pos. 9 (pic. 6.1). Secure the threaded pin once the desired position has
been established.
Make sure that the grub screw is firmly seated!
!
Pic. 6.1
Pic. 6.2
Pic. 5.10
