Page
2
ISIMET
RLA Series Style 3 Controller
Installation, Maintenance, Operations, and Startup Instructions
Copyright © 2015
ISIMET/MAPA, LLC
.
All rights reserved.
Patent 6,757,589 B1
6,990,393 B2
Other Patents Pending
This document is copyrighted. This document may not, in whole or part, be copied, duplicated, reproduced,
translated, electronically stored, or reduced to machine readable form without prior written consent from
ISIMET
.
Although the material contained herein has been carefully reviewed,
ISIMET
does not warrant it to be free of
errors or omissions.
ISIMET
reserves the right to make corrections, updates, revisions, or changes to the
information contained herein.
ISIMET
is a trademark of
ISIMET/MAPA
, LLC, an affiliate of
WCM Industries
, Inc.
Warranty:
ISIMET
will repair or replace any defective parts or workmanship of this product for a period of one year from date of
installation. The Primary Operating P.C. Board has a two year limited warranty.
Damage caused by incorrect installation or
improper usage is not warranted. Failure to follow recommended installation, operation, and/or maintenance procedures listed
in this manual may void product warranty. Recovery rights shall be limited to the total sum of the amounts paid for the
product by the purchaser.
Limits of Liability:
ISIMET's
liability shall be limited to costs of repair or replacement parts. The Laboratory Service Panel and Utility Controller
are not intended for usage other than those expressly described in this manual.
ISIMET
shall not be liable for damage or injury
caused by the improper use of the product.
ISIMET
does not warrant against or assume liability for failure of operation or lack of notification to secondary integrated
monitoring systems. The system should be thoroughly tested and adjustments made at time of initial operation. Periodic
testing should be conducted by the user to assure that all components function and operate according to specifications.
Care should be taken in the installation of this product.
ISIMET
shall not be liable for damage or injury caused from the
improper installation of the product.
Warranty is Subject to Compliance with Specific Installation Requirements.
EXTENDED WARRANTY:
ISIMET
will extend the warranty period of the products when installation complies with all start up procedures and that a
factory authorized agent either performs or is in attendance during start-up of the system(s). Controllers, Companion and
Accessory Panels will be extended to a period of five years from date of installation. Except for
ISIMET
FLA, DLA, RLA and
other Units where automation systems are not common, Control System(s) must be interfaced with a building automation
system or other
ISIMET
approved time sequencing control for “non-use” system shutdown. All operating components of the
system must be
ISIMET
provided. Prescribed routine maintenance procedures must be performed per
ISIMET
recommendations.
All Start-up and Routine Maintenance Documentation shall be per Factory Recommendation.
Further, required start-up and maintenance procedures must be performed as directed upon all affected systems. This
warranty shall only become enforceable upon issuance of application specific Extended Warranty Document. A copy of this
document should be maintained at all times at the location of the warranted systems.
DISCLAIMER OF IMPLIED WARRANTY:
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION HEREIN. SELLER DISCLAIMS ANY
IMPLIED WARRANTY OF MERCHANTABILITY OF THE GOODS OR OF THE FITNESS OF THE GOODS FOR ANY
PURPOSE, AND BUYER AGREES THAT THE GOODS ARE SOLD “AS IS.”
Printed in the United States
Содержание RLA Series
Страница 5: ...Page 5...
