2
ISIMET
DLA Series Utility Controller
Installation, Maintenance, Operations, and Startup Instructions
Copyright © 2013
ISIMET
, LLC.
All rights reserved.
Patent 6,757,589 B1
6,990,393 B2
This document is copyrighted. This document may not, in whole or part, be copied, duplicated, reproduced,
translated, electronically stored, or reduced to machine readable form without prior written consent from
ISIMET
,
LLC.
Although the material contained herein has been carefully reviewed,
ISIMET
, LLC does not warrant it to be free of
errors or omissions.
ISIMET
reserves the right to make corrections, updates, revisions, or changes to the
information contained herein
.
Warranty:
ISIMET will repair or replace any defective parts or workmanship of this product for a period of one year
from date of installation. The P.C. Board has a two year limited warranty.
Damage caused by incorrect
installation or improper usage is not warranted. Failure to follow recommended installation, operation,
and/or maintenance procedures listed in this manual may void product warranty. Recovery rights shall be
limited to the total sum of the amounts paid for the product by the purchaser.
EXTENDED WARRANTY:
ISIMET will extend the warranty of this product to a period of two years from date of installation when
installation complies with all start up and routine maintenance procedures and Start up has been performed
by an authorized factory representative. Refer to Extended Warranty Policy.
Limits of Liability:
ISIMET's liability shall be limited to costs of repair or replacement parts. The Laboratory Service Panel and
Utility Controller are not intended for usage other than those expressly described in this manual. ISIMET
shall not be liable for damage or injury caused by the improper use of the product.
ISIMET does not warrant against or assume liability for failure of operation or lack of notification to
secondary integrated monitoring systems. The system should be thoroughly tested and adjustments made at
time of initial operation. Periodic testing should be conducted by the user to assure that all components
function and operate according to specifications.
Care should be taken in the installation of this product. ISIMET shall not be liable for damage or injury
caused from the improper installation of the product.
Warranty is Subject to Compliance with Specific Installation Requirements.
DISCLAIMER OF IMPLIED WARRANTY:
THERE ARE NO WARRANTIES THAT EXTEND BEYOND THE DESCRIPTION HEREIN. SELLER
DISCLAIMS ANY IMPLIED WARRANTY OF MERCHANTABILITY OF THE GOODS OR OF THE
FITNESS OF THE GOODS FOR ANY PURPOSE, AND BUYER AGREES THAT THE GOODS ARE
SOLD “AS IS.”
