iSHAN YET -A1P2, Руководство по эксплуатации, Страница: 6 / 21

6 - 21
2-3 Marking Label
Name Plate (YET-A1) Name Plate (YET-A2) Electric Shock
Right front side of control box Right front side of control box
Outside the control box
Oil level Connection Operation
HIGH
LOW
Left front
side of
oiltank
Inside the control box Left lateral side of the oil tank
YET-A1/YET-A2
操作說明（
Operation instruction
）
一、 操作方式（
Operating
）：
1.
▲▼ ： 潤滑
/
間歇時間設定鍵（潤滑時間：
1~999
秒、間歇時
間：
1~999
分）。當按住設定鍵約
2
秒後即可調整時間設定值，
鬆手約
2
秒後，注油機開始此一新設定之時間運作。
2.
▲ ：數字遞增； ▼ ：數字遞減。
3.
潤滑、間歇兩指示燈同時閃爍表示在設定模式。
4. RES
：復歸鍵。按住此鍵約
2
秒可重新開始潤滑計時。
1.
▲▼ ：
Lubrication/intermittent time setting keys.( Lubrication time
range from 1~999 seconds, intermittent time range from 1~999
minutes
）
. Push down the soft key for 2 seconds then adjust the
setting time. After releasing for 2 seconds, the lubricator will operate
as new set.
2.
▲ ：
Soft key for time increase progressively.
▼ ：
Soft key for time decrease progressively.
3. Both of the lubrication and intermittent indicators will blink under
setting mode.
4. RES
：
Soft key for restart lubricating cycle. (Push down the soft key
for 2 seconds to restart lubricating cycle.
）
二、 注意事項（
Notes
）：
1.
本機適用油品之粘度約
30 ~250 cSt.
。
2.
限用新油並請定期清理油箱底部及濾網
3.
如對本注油機有任何疑難問題，請立即與本公司聯絡。
1. Permissible oil viscosity range from 30 to 250 cSt.
2. Use new oil and clean the oil filter and the oiltank periodically.
3. If you meet any question about this lubricator, please inform with
us at once.
接地
電 源
POWER
異 常 出 力
NC COM NO