4 - 21
2 Commencement of operation
2-1 Safety measures
2-1.1 Before
installing
!
Before installing, refer to instructions for the correct connection of the power.
!
Make sure the correct electrical specification before installation.
! iSH
AN
centralized lubrication systems shall not used for purposes other than the
lubrication of machines with oil.
2-1.2 Before filling oil
!
Use only oil with a viscousity of 30 to 250 cSt. Caution ! Lubricator might start to burn
if using oil with a viscousity higher than 250 cSt.
!
Fill in only with new oil.
Please never fill in with used oil.
!
Never fill in with chemical substances or water.
!
Remove any particles and dirt sticking in the oiltank immediately in order to maintain
propper
lubrication.
!
When filling with oil in the tank, please watch out that no oil is spilled onto the
display and controlpanel.
2-1.3 Safety measures for the control panel
!
In order to avoid disorders of the control panel, never let it have contact with water or
oil.
2-1.4 When failures occur
!
In order to avoid disorders of the control panel, never let it have contact with water or
oil.
!
Only the
iSH
AN
-
customer service workshops are authorized to repair lubricators and
the spare parts must be the originals.
