Contents
1
Introduction ......................................................................................................... 2
1.1
General function, benefit in application ........................................................ 2
1.2
Intended use................................................................................................. 3
1.3
Safety symbols ............................................................................................. 3
1.4
Safety guidelines .......................................................................................... 4
2
Technical specifications .................................................................................... 5
2.1
General, process - and logic power supply .................................................. 5
2.2
Module overview .......................................................................................... 7
2.3
Plug allocation .............................................................................................. 8
2.4
DIP Switches .............................................................................................. 12
2.5
Assembly, installation, connection .............................................................. 13
2.5.1
Base connection (Logic voltage and CAN bus)
13
2.5.2
Digital inputs
13
2.5.3
Digital outputs (relay outputs)
14
2.5.4
Digital electronic outputs (switching transistors)
15
2.5.5
Analog output
16
2.5.6
Analog input
18
2.5.7
Diagnosis, signalization, fault states
18
3
Integration into the control software (ProNC, Remote) ................................. 19
3.1
Settings in the module management .......................................................... 19
3.2
Settings within the Contro administration ................................................... 21
3.3
Version information .................................................................................... 24
3.4
Diagnosis function ...................................................................................... 25
3.5
Status information ...................................................................................... 26
4
Index .................................................................................................................. 27
