isel
Gantry and Flat-Bed Machines
Page 13
6.3
Operator panel
6.3.1
Front side operator panel
The machine is operated using the operator controls on the operator panel, as well as by way
of the keyboard and mouse. They help you to set up and operate the machine according to
your requirements.
1
Status LEDs of the PC
2
EMERGENCY STOP
button
... turns off the drive control.
Unlocked by turning
CW.
3
Fault
indicator
... signals a fault
in the drive control. The
motor output stages are not
powered.
4
Power
button
... turns on the power electronics.
You can only turn on the operating
voltage of the output stages if the
EMERGENCY STOP button is
unlocked and the cover
(if installed) is closed.
5
Start
button
... starts the user program
or resumes a stopped motion. The machine motion is continued from the exact point at
which it was interrupted by pressing the Stop button, unless the machining
was has been ended via the software.
