isel
Gantry and Flat-Bed Machines
Page 12
6.2
Cover lock
-
Generally, the machine must stand in its home position (reference point) - as when
delivered - for the cover to be opened, unless the machine is in the test mode or you
have disabled the safety function using the triangular key.
-
The machining spindle can only rotate with the cover closed.
-
In special situations (if the switch is defective or in case of power failure, etc.), you
can open the cover lock manually using the triangular key.
1.
Turn off the machine.
2.
Turn the triangular key a half turn in the anti-clockwise
direction without applying any particular force and open
the cover.
Under no circumstances must the machine be started in
this condition!
The motors of the machine tools are not powered
in this condition.
3.
Turn the triangular key back in the clockwise direction.
