Iseki TH4295 страница 25 Скачать руководство пользователя | Manualshive

Страница: 25 / 113

background image

TH4295,4335,4365

22

The information in this publication describes the operation, maintenance and servicing of the TH4295, 4335, 4365
Tractors. Every effort has been made to provide correct and concise information to you, the operator, as available at
date of book publication. Your ISEKI Dealer is available for farther information about items in this book or details of
your machine not be understood.

This book is supplied with each machine to familiarize the operator with proper instructions needed for operation
and maintenance. Studying and adhering to these instructions will insure optimum machine performance and lon-
gevity. A machine that is maintained properly and operated in the intended manner will provide greater dividends
than one that is neglected and/or operated in manner other than as intended. Design and servicing of this ma-
chine has been kept as simple as possible to permit maintenance operations to be carried out with tools normally
available.

This book should be thoroughly read and understood prior to operation of this machine. Inexperienced operators
should study contents of this publication and receive instruction from an experienced operator when possible.
Your ISEKI Dealer can also assist in areas concerning machine operation and provide details concerning safe
operation. It is suggested that this booklet be kept readily accessible, preferably with the machine, for future
reference if questions or concerns arise. If the original book should become damaged, consult your Dealer in
regards to acquiring a replacement.

Customers are strongly advised to use an official ISEKI Dealer in connection with any service problems and ad-
justments that may occur. The ISEKI Dealer network is specially trained and equipped for all service work and to
advise customers on specific applications of the Tractor in local conditions.

CAUTION: In some of the illustrations used in this Operator Instruction Book, panels or guards
may have been removed for clarity. Never operate the Tractor with these panels and guards
removed. If the removal of a shield is necessary to make a repair, it MUST be replaced before
operation.

CAUTION: READ THIS BOOK IN ITS ENTIRETY PRIOR TO OPERATING MACHINE.
Use only ISEKI parts for repairs and/or replacement.

INTRODUCTION

«
...
23
24
25
26
27
...
»

Содержание TH4295


















































































































Отзывы:

Нет отзывов

Похожие инструкции для TH4295

Бренд: FENDT Страницы: 31

Бренд: Rankin Страницы: 26

Бренд: Cub Cadet Страницы: 48

Бренд: SaMASZ Страницы: 48

Бренд: Sears Страницы: 32

Бренд: Toro Страницы: 12

Бренд: Toro Страницы: 120

Wheel Horse 79361

Бренд: Toro Страницы: 28

Бренд: Smithco Страницы: 43

Бренд: CARRE Страницы: 36

Бренд: CARRARO Страницы: 296

Agricube F Series

Бренд: CARRARO Страницы: 399

Бренд: Jenn-Air Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды