Iseki 1812001, Руководство пользователя

Страница: 14 / 31

14
546336.B.9
Original version
Troubleshooting
The common faults Elimination method
The engine cannot be started
Read the engine users’ manual
Check the fuel ON-OFF, see if it’s ON
Check if for fuel and lubrication oil
Check the emergency stop button
Connect wire onto Spark Plug
Clean Spark Plug
Replace Spark Plug
Clear any debris in inlet chute or blade housing
Check if the safety switch is reset and if interlocking switches are
connected properly.
Engine flameout midway
Check if the engine is stopped by overloading Check if something
blocked in the chipping hopper
Check if the safety switch is reset and if interlocking switches are
connected properly.
Check if there is enough fuel and lubrication oil
Strange noise
Stop the machine and check if any fasteners are loose, if not get it
checked by an authorised dealer
Blade destroyed Consult an authorised dealer for repair or replacement of the blades
Belt creep
Refer maintenance section of the manual to check the belt.
Get the machine checked by an authorised dealer for any repairs.
The material grinding not sufficient Consult an authorised dealer to adjust the blade settings.
Specification
Model: BBH130
Max. Chipping Capacity*: Ø 100mm
Max. Blade Speed: 2530r/min
Engine Type: Honda GX390 (Refer to owner's manual for engine specifications)
Displacement: 389cm
3
Fuel Volume: 6.5L
Oil Volume: 1.1L(10W-30)
Starting System: Recoil
Fuel Type: Clean Unleaded Gasoline
Carton Size: 1100*680*1600mm
Attachment: Engine manual, toolkit, gloves and safety glasses
* Maximum chipping capacity is based on tests conducted on Bamboo with 90% moisture content and paulownia trees with 80% moisture
content. The actual chipping capacity will depend on hardness and moisture content of the chipping material.