iseg EHS CFG, Руководство пользователя

Страница: 7 / 51

Table of Contents
Document history 2
Disclaimer / Copyrights 2
Safety 3
Description of the safety instructions 3
Intended use 4
Qualification of personnel 4
General safety instructions 4
Important safety instructions 5
1 General description 9
1.1 EHS Standard series 9
1.2 EHS High Precision series 9
2 Technical data 10
2.1 EHS Standard series 10
2.2 Technical data: EHS High Precision series 14
2.3 Options 18
3 Handling 19
3.1 Connection 19
3.2 Module status 20
3.3 Hardware Limit 20
3.4 Safety Loop 20
3.4.1 Safety Current Loop 20
3.4.2 Safety Return (SRTN) 20
3.5 Delayed Trip 21
3.5.1 Operating principle 21
3.5.2 Limitations 21
3.5.3 Modules with two current measurement ranges 22
4 Options 23
4.1 Single Channel Inhibit (IU, ID, NIU, NID) 23
4.2 SLA – Active safety loop 24
4.3 SLP – Internally powered safety loop 24
4.4 1CR – One current measurement range only (HP series) 24
4.5 F02 – High floating voltage 24
4.6 F20 – Very high floating voltage 24
4.7 TC – Lower temperature coefficient 24
4.8 VLN 24
4.9 L – Lower output current (HP only) 24
5 Front panel versions 25
6 Dimensional Drawings 29
7 Connectors assignments 40
8 PIN assignments 44
8.1 INHIBIT – D-SUB9 44
8.2 INHIBIT – socket 5pol 44
8.3 Safety Loop socket 44
8.4 Limit monitor – socket 1pol 44
8.5 Limit monitor – socket 2pol 44
8.6 Redel – R51.41 45
8.7 Redel – R51.43 45
8.8 Redel – R51.44 45
8.9 Redel – R51.45 46
8.10 Redel – R51.46 46
EHS High Voltage Power Supply series | Last changed on: 2022-03-14 |
www.iseg-hv.com
7/51