iseg EHQ Series, Руководство программиста

Страница: 6 / 63

Table of Contents
Document history 2
Safety 3
Depiction of the safety instructions 3
Intended use 4
Qualification of personnel 4
General safety instructions 4
1 General information to high voltage devices 8
1.1. Channel and Module 8
1.2. Devices covered by this manual 8
1.3. High voltage device operation modes 9
1.3.1 Terminology 9
1.3.2 Channel operation modes 10
1.4. Status and Event generation 11
1.5. Hardware options 11
1.5.1 Option VCT (Voltage Compensation by Temperature) 11
2 Introduction to SCPI commands 12
2.1. Introduction 12
2.2. General Command Syntax 12
3 Interfaces 15
3.1. USB and RS-232 interface 16
3.1.1 Programming 16
3.1.2 RS-232 interface 16
3.1.3 USB interface 17
3.1.4 Windows USB driver installation 18
3.1.5 Linux USB driver installation 19
3.2. Ethernet 21
3.2.1 Hardware Implementations 21
3.2.2 Connecting over Ethernet 21
3.2.3 Ethernet programming example 22
4 Common instruction set 24
5 NHR, SHR, NHS and MICC 25
5.1. SCPI Instruction Set 25
5.2. Hardware Options 35
5.2.1 Option VCT 35
6 HPS and FPS 36
6.1. SCPI Instruction Set 36
6.2. ARC Management configuration for HPS ≥ 1.5 kW 42
6.3. Controlling HFS devices 42
6.3.1 Introduction 42
6.3.2 FPS Heating and Emission Regulation parameters 43
6.3.3 Direct Heating and Emission Regulation 43
7 Output formats for voltage and current 44
7.1. Examples 45
7.1.1 Simple examples 45
7.1.2 Advanced examples 45
7.1.3 Commands for NHR and SHR 45
8 Description of control, status, event, and mask registers 46
SCPI protocol common instruction set | Last changed on: 2020-11-10 |
www.iseg-hv.com
6/63