iseg EHQ 1 Series, Техническая документация инструкция

Страница: 7 / 46

Table of Contents
Document history 2
Disclaimer / Copyright 2
Safety 3
Depiction of the safety instructions 3
Intended Use 4
Qualification of personnel 4
General safety instructions 4
Important safety instructions 5
1 General description 9
2 Technical Data 10
3 Description 12
3.1. High voltage supply 13
3.2. Digital control unit 13
3.3. Filter 13
3.4. Front panel 14
4 Handling 15
5 RS232 Interface 16
5.1. RS232 control mode 16
5.2. Manual control mode 17
5.3. Specification of the RS232 interface 17
6 USB Interface 18
6.1. Driver Installation 18
6.2. Linux USB driver installation 19
6.3. Interface Test 20
6.3.1 Under Windows 20
6.3.2 Under Linux 22
7 ISEG instruction set, old DCP 23
7.1. Status information 24
7.2. Error codes 24
7.3. Module status 25
7.4. Auto start 25
7.5. Software 25
7.6. Program example 26
8 SCPI command list 27
8.1. change of command mode 27
8.2. iseg SCPI command set 27
8.3. Examples 29
9 Description of control, status, event, and mask registers 30
9.1. Channel Status (read access) 30
9.2. Channel Event status (read access) 32
9.3. Channel Event mask (write access, read access) 33
9.4. Channel Control: (read access) 34
9.5. ModuleStatus (read access) 35
9.6. Module EventStatus (read access) 37
9.7. ModuleControl (read access) 38
9.8. Common-instructions 39
10 Dimensional drawings 40
11 Connectors and PIN assignments 41
EHQ High Voltage Power Supply series | Last changed on: 11.05.2020 |
www.iseg-hv.com
7/46