Doc. SIE20167
Rev. 2
Page
10 of 11
PERFORMANCE
CHARACTERISTICS
B) RESIDENT FIRMWARE
Test settings
Recorded in a NVM
Number of memories
8
Maximum test duration that can be recorded
15 h, with 15 s resolution
Maximum test duration, not recorded in memory
infinite
Memory profile mode: maximum number of test steps
20
Memory profile mode: time and current resolution
1 minute – 1 A
Memory profile mode: maximum time and current steps
600 minutes – 1300 A
Test set control mode
Via e push-button and
menu on the display
Measurements on the display
. Date;
. Time;
. Internal discharge current;
. External discharge current;
. Battery voltage;
. Ah discharged;
. Elapsed test time.
Test stop settings
. Minimum voltage;
. Maximum Ah;
. Maximum test time;
. System alarms;
. Test stop from remote contact.
Continue after an alarm
YES
Firmware upgrade
YES
System control
Digital, by two microprocessors
Test set protections
. Heat sink over-temperature;
. Fuse failure;
. Fans failure;
. Minimum battery voltage;
. Maximum battery voltage;
. Wrong battery voltage;
. Overload;
. Control circuit error;
. Power circuits failure;
. CAN-bus error;
. External current metering error;
. Manual emergency pressed;
. USB interface error;
. EEPROM memory error;
. Firmware error.
Reversed battery insertion protection
YES
Automatic cool down procedure at end of test
YES
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
