Doc. SIE20167
Rev. 2
Page
4 of 11
1 GENERAL DESCRIPTION
This technical specification is to describe the technical characteristics of the battery test set
BTS200 MKII, designed for the test of battery benches using the discharge method. This testing
device can discharge the battery in different modes, to measure the capacity of new and used
battery. With respect to the former BTS200, the MKII uses a technological improvement, that has
allowed to reduce weight and dimensions.
BTS200 MKII allows the connection to up to nine auxiliary modules type ELU200 MKII (or
ELU200, or other BTS200 MKII, or other BTS200), that enhance the discharging capability.
With the optional current clamp, or with the external shunt, it is also possible to use the real
burden as the additional burden, and to control the total discharging current in the selected mode.
The device is microprocessor based. This allows the control of all the discharging parameters in
real time. It also allows communication with a PC for the control and the data representation of the
discharging parameters. The following is the test set picture.
With respect to the former version, MKII features the following improvements.
The weight has been decreased of 9 kg, from 48 kg to 39 kg.
Dimensions have been reduced, from 283 x 803 x 420 mm (WDH) to 283 x 700 x 420
mm.
Two wheels have been added, to ease the transport.
The number of discharging steps that can be programmed have been increased from 10 to
20: this eases drawing any discharge profile.
Shop for Power Metering products online at:
1.877.766.5412
www.
PowerMeterStore
.ca
