11
|
Mounting and Installing Raptor
IM-Raptor-1.3.6-EN
4.5.1 Electrical / Mechanical Hazards Prevention
♦
When installing the device in a closed or multi-device rack, be aware that the operating ambient temperature of the rack
may be higher than the ambient temperature of the room. Make sure the rack is installed in a suitable environment that
can withstand the maximum ambient temperature generated by the rack.
♦
Do not exceed the maximum number of devices or weight restrictions specified by the rack manufacturer.
♦
Do not overload the supply circuit. Refer to the overcurrent protection and power supply ratings specified by the rack
manufacturer.
♦
Make sure the rack and all devices have a proper ground-to-Earth connection. Pay particular attention to power supply
connections other than direct connections to the branch circuit (e.g. power strips). Ensure that the rack mount adapters
are installed on the correct side of the chassis.
Electrocution hazard – risk of death, serious personal injury and/or damage to the device.
Caution – Access to wiring terminals and replaceable modules is restricted to Skilled Persons only.
4.5.2 Humidity and Dust Hazards
Do not store the switch in locations where it will be subject excessive dirt and dust and high humidity. Conformal coating
is recommended for humid / moist applications.
4.6 Mounting Raptor on a Rack
Ensure that the rack mount brackets are installed on the correct side of the chassis.
1. Raptor
Unit
2. Mounting Bracket
3. Mounting Screws
