iES28TG/iES28GF User Manual
99
iS5 Communications Inc.
Trap Event Interface
Indicates that the Interface group's traps. Possible traps are: Indicates that
the SNMP entity is permitted to generate authentication failure traps.
Possible modes are:
Warm Start: Enable SNMP trap authentication failure.
Link Up:
Enable/disable Link up trap.
Link Down:
Enable/disable Link down trap.
LLDP:
Enable/disable LLDP trap.
Trap Event AAA
Indicates the AAA group's traps. Click the Authentication Fail check box to
enable it.
Trap Event Switch
Indicates that the Switch group's traps. Possible traps are:
STP:
Enable/disable STP trap.
RMON:
Enable/disable RMON trap.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved
values.
5.6.3
SNMP Community Configurations
This p age al l o w s you to configure SNMPv3 community table. The entry index key is
Community.
Label
Description
Delete
Check to delete the entry. It will be deleted during the next save.
Community
Indicates the community access string to permit access to SNMPv3 agent.
The allowed string length is 1 to 32, and only ASCII characters from 33 to
126 are allowed.
Source IP
Indicates the SNMP source address.
Source Mask
Indicates the SNMP source address mask.
Add New Entry
Click to add a new community configuration.
Save
Click to save changes.
Reset
Click to undo any changes made locally and revert to previously saved
values.
5.6.4
SNMP User Configurations
This page allows you to configure SNMPv3 user table. The entry index keys are
Engine ID
and
User
Name
.
