iES28TG/iES28GF User Manual
47
iS5 Communications Inc.
IP Routes
Configure IP Routes information of the switch on the following page.
Label
Description
Delete
Select this option to delete an existing IP route.
Network
The destination IP network or host address of this route. Valid format
is dotted decimal notation. A default route can use the value 0.0.0.0.
Mask Length
The destination IP network or host mask, in number of bits (prefix
length). It defines how much of a network address that must match, in
order to qualify for this route. Valid values are between 0 and 32 bits.
Only a default route will have a mask length of
0
(as it will match
anything).
Gateway
The IP address of the IP gateway. Valid format is dotted decimal
notation.
Next Hop VLAN
The VLAN ID (VID) of the specific IPv6 interface associated with the
gateway. The given VID ranges from 1 to 4094 and will be effective
only
when
the
corresponding
IPv6
interface
is
valid.
If the IPv6 gateway address is link-local, it must specify the next hop
VLAN
for
the
gateway.
If the IPv6 gateway address is not link-local, the system ignores the
next hop VLAN for the gateway.
Add Interface
Click to add a new IP interface. A maximum of 128 interfaces are
supported.
Save
Click to save changes
Reset
Click to undo any changes made locally and revert to previously
saved values
5.1.5
SNTP Configuration
Configure SNTP on this page.
