IS5 COMMUNICATIONS iES28GF Скачать руководство пользователя страница 141

Страница: 141 / 205

iES28TG/iES28GF User Manual

141

iS5 Communications Inc.

Retransmit

Retransmit is the number of times, in the range 1 to 1000, a RADIUS request is

retransmitted to a server that is not responding. If the server has not responded

after the last retransmit it is considered to be dead.

Dead Time

Deadtime, which can be set to a number between 0 to 1440 minutes, and is the

period during which the switch will not send new requests to a server that has

failed to respond to a previous request. This will stop the switch from continually

trying to contact a server that it has already determined as dead.

Setting the Deadtime to a value greater than 0 (zero) will enable this feature, but

only if more than one server has been configured.

Key

The secret key - up to 63 characters long - shared between the RADIUS server and

the switch.

NAS-IP-
Address
(Attribute-4)

The IPv4 address to be used as attribute 4 in RADIUS Access-Request packets. If this

field is left blank, the IP address of the outgoing interface is used.

NAS-
Identifier
(Attribute 32)

The identifier - up to 255 characters long - to be used as attribute 32 in RADIUS

Access-Request packets. If this field is left blank, the NAS-Identifier is not included

in the packet.

Delete

To delete a RADIUS server entry, check this box. The entry will be deleted during

the next Save.

Hostname

The IP address of the RADIUS server.

Auth Port

The UDP port to use on the RADIUS server for authentication.

Acct Port

The UDP port to use on the RADIUS server for accounting.

Timeout

This optional setting overrides the global timeout value. Leaving it blank will use the

global timeout value.

Retransmit

This optional setting overrides the global retransmit value. Leaving it blank will use

the global retransmit value.

Key

This optional setting overrides the global key. Leaving it blank will use the global

key.

Add New
Server

Click “Add New Server” to add a new RADIUS server. An empty row is added to the

table, and the RADIUS server can be configured as needed. Up to 5 servers are

supported.

Save

Click to save changes.

Reset

Click to undo any changes made locally and revert to previously saved values.

Содержание iES28GF














































































































































































































Результаты поиска

Содержание iES28GF

Отзывы:

Похожие инструкции для iES28GF

Бренды по названию

Популярные бренды

IS5 COMMUNICATIONS iES28GF, Руководство пользователя

Результаты поиска

Содержание iES28GF

Отзывы:

Похожие инструкции для iES28GF

Бренды по названию

Популярные бренды