iES28TG/iES28GF User Manual
119
iS5 Communications Inc.
Label
Description
Port Members
Check to include the port in the QCL entry. By default, all ports are
included.
Key Parameters
Key configurations include:
Tag
: value of tag, can be
Any
,
Untag
or
Tag
.
VID
: valid value of VLAN ID, can be any value from 1 to 4095
Any
: user can
enter either a
specific value
or a
range
of VIDs.
PCP
: Priority Code Point, can be specific numbers (
0, 1, 2, 3, 4, 5, 6,
7
), a range (
0-1, 2-3, 4-5, 6-7, 0-3, 4-7
) or
Any
DEI
: Drop Eligible Indicator, can be
0,
1
or
Any
SM AC
: Source MAC Address, can be
specific
(xx-xx-xx, 24 MS bits OUI) or
Any
DM AC Type
: Destination MAC type, can be
unicast
(
UC
),
multicast
(
M C
),
broadcast
(
BC
) or
Any
Frame Type can be the following values:
Any
Ethernet
LLC SNAP
IPv4
IPv6
Note: all frame types are explained below.
Any
Allow all types of frames
Ethernet
Valid Ethernet values can range from 0x600 to 0xFFFF or Any' but
excluding 0x800(IPv4) and 0x86DD(IPv6). The default value is Any.
LLC
SSAP Address
: valid SSAP (Source Service Access Point) values can range from
0x00 to 0xFF or Any. The default value is Any.
DSAP Address
: valid DSAP (Destination Service Access Point) values can range
from 0x00 to 0xFF or Any. The default value is Any.
Control
Valid Control: valid values can range from 0x00 to 0xFF or
Any. The default value is Any.
SNAP
PID
: valid PID (a.k.a ethernet type) values can range from 0x00 to
0xFFFF or Any. The default value is Any.
