Ironwood SLR305 | User Manual
8
3.3 Inspection
Save all containers and packing materials until you are satisfied
that your machine has arrived in good condition. If you discover the
machine is damaged after you’ve signed for delivery, immediately
call Stiles Customer Service at 616.698.7500.
When you are completely satisfied with the condition of your
equipment, you should inventory its parts.
Open and check the contents of all containers to ensure all tools,
hardware, and accessories are included. The tool kit should contain
the following items:
1. Oil pot
2. Open-ended wrench set (3 pieces)
3. Allen wrench set
4. 10mm T-handle Allen wrench
5. 4 leveling pads
6. 4 leveling bolts with nuts
7. Saw arbor wrench
8. Paint (2-color set)
9. Fence assembly
10. User manual
3.4 Move Machine to Final Position
Be sure the site is properly prepared. Refer to section 2.0 for details.
Be sure the access doors are closed and secured before
transporting.
TOOLS REQUIRED:
• Fork lift
Use a fork lift to move the machine on its pallet to its final location.
Make sure fork travel is clear of any obstacles or wiring. Lift the
machine from the front side so that the fork is positioned in the
fork slots in the machine base. When transporting the machine,
the fork must be over the center of gravity of the machine to avoid
hazardous situations.
The infeed and outfeed direction of workpieces must not face areas
where people gather or pass through.
Use a fork lift to move
the machine on its pallet.
