STEP TWO:
Locate the following parts. L/R SLIDE RAILS/Slide Rail Allen wrench (included)/2x
1/2”x25mm bolts and Spring Washers . CAUTION: Aligning the SLIDE RAILS and BASE
FRAME assembly will require two people.
With two people, tilt the
BASE FRAME assembly
and install the 1/2”x25mm
bolts/washers from under-
neath the BASE FRAME
assembly and into the
SLIDE RAIL as shown.
NOTE: Make sure holes
are facing forward, and
the end with the holes
closet to the bottom of the
SLIDE RAIL fit into the
BASE assembly as
shown.
Check that the base of
SLIDE RAIL is lined up
Parallel to the BASE LEG
before securing.
Repeat procedure with
SLIDE RAIL
BASE FRAME ASSEMBLY
Installing 1/2”x25mm bolt and
washer through BASE FRAME
into SLIDE RAIL
BASE LEG
Prior to Standing completed assembly, check that 1.
Bolts attaching SLIDE RAILS to BASEFRAME assembly
are properly tightened and 2. The SLIDE RAILS are in-
stalled in the correct orientation eg; holes facing forward
and parallel to the BASE LEGS.
Completed Step 2 assembly
Installing opposite SLIDE RAIL
showing correct orientation
Incorrect
Correct
Correct
