4
TV Operation: Menus
There are several menus that may be utilized to maximize the experience of your Legacy
Treadmill.
1
Please press the “MENU" on the panel to enter main menu then the correspondent and press
“CH+”or “CH-" to select function, then press "VOL-” to select option to be adjusted, finally press
“VOL+” or “VOL-”to set parameter. To exit press “MENU”. The Menu will exit automatically when
no button has been pushed in one minute.
.
Picture one is Picture menu in which Video system, Contrast, Brightness, Color, Sharpness can
be adjusted accordingly.
Picture two is Function menu, in which system functions can be set. SOURCE has the options
of TV input, AV input. LANGUAGE has the options of English and Chinese. SCALER has the op-
tions of 16:9 and 4:3.
4.
Picture three is TUNING menu, in which there are functions of CH. Skip, CH. SWAP, Sound-
system, Area & Tune.
Search programs:
Entering the menu, then press “CH+” or “CH-" to select “Auto” option, after-
wards press “VOL+” this unit will begin to search automatically from the first channels and store
the available program channels, which will take several minutes. After searching, the first pro
-
gram channel will be displayed automatically. Meanwhile, 0 channel could be stored any program
by “Manual”.
*The “CH.SWAP” could change two program channels CH.SKIP.
*If any program signal is too weak to display, could be selected, then use “VOL+” or “VOL-" to
set it as skip. Next time when pressing “CH+”or “CH-" to select programs, the TV will be in the
skip mode.
*If there is no color or sound due to weak signal, the “FINE" could be selected to adjust the
channel.
