background image

Basic precautions should always be followed when using this equipment.    Read all 
the instructions before using this equipment which include the following safety 
instructions: 

1. Read all the instructions in this manual and do warm up exercises before using this

equipment.

2. Before exercising, and in order to avoid injuring yourself, it is recommended that you

perform warm-up exercises for every muscle group.

3. Please make sure that all the components are not damaged and that all the hardware

is    thoroughly tighten before use.       

4. This equipment should be placed on a flat surface when using. Placing a mat or other

covering material on the ground underneath the equipment is recommended.

5. Please wear proper clothing and shoes when using this equipment; do not wear

clothes that are loose and might get caught by any part of the equipment; remember to

tighten the pedal straps before working out.

6. Do not attempt any maintenance or adjustments other than those described in this

manual. Should any problems arise, discontinue use and consult customer service

.

7. Do not use or leave the equipment outdoors.

8. This equipment is for household use only.

9. Only one person should be on the equipment while in use.

10. Keep children and pets away from the equipment while in use. This machine is

designed for adults only. This product requires a minimum of 6 square feet of space for

safe operation.

11. If you feel any chest pains, nausea, dizziness, or shortness of breath, you should stop

exercising immediately and consult your physician before continuing.

12.

The maximum weight capacity for this product is 275 lbs/125 kgs

.

WARNING:

 

Before beginning any exercise program consult your

physician. This is especially important for people who are over 35 years old or who 

have pre-existing health problems.  Read all instructions before using any fitness 

equipment.

CAUTION:

 Read all instructions carefully before operating this product.

Retain this Owner’s Manual for future reference. 

PRODUCT

 

SAFETY

 

Содержание 6100.4-061716


























Отзывы: