6. Console Installation
Remove the four Phillip Screws (26) from the backside of the Console (11).
Connect the Upper Console Wire (24) and Sensor Wires (25) to the wires at the back
of the Console (11), as shown in Fig. AA-3. Gently insert the computer wires into the
Front Post (2) and be sure the wires aren’t pinched or disconnected. Attach the
Console (11) onto the Front Post (2) with the four Phillip Screws (26) previously
removed. Then tighten the Phillip Screws (26) with the Multi Hex Tool with Phillips
Screwdriver (32) provided.
7. Bottle Holder Installation
Remove two Bottle Holder Screws (27) from the Front Post (2). Attach the
Bottle Holder (14) onto the Front Post (2) with the two Bottle Holder Screws (27)
and tighten with the Multi Hex Tool with Phillips Screwdriver (32) provided.
ASSEMBLY
13
Multi Hex Tool with Phillips
Screwdriver
S10, S13, S14, S15 1PC
Multi Hex Tool with Phillips
Screwdriver
S10, S13, S14, S15 1PC
