iPORT1
PORT2
LOCK/UNLOCK
USB
4.2. Status Indicators
CONVERTER STATUS
ETHERNET
iPORT1, PORT2
- socket for RS-485 Line 1 (has galvanic isolation)
- socket for RS-485 Line 2 (has no galvanic isolation)
- a security switch. When in LOCK position, Telnet connection and network
firmware updates are disabled. In Web Client mode, also disabled are controller memory changes
(writing cards, timezones etc.), as well as configuration and firmware updates over the network.
- Type B USB connector, to connect to a PCs for a local configuration or firmware update
session. A necessary AM-BM type USB cable is provided with the device.
displays general converter status.
displays LAN connection status
displays RS-485 lines status.
page 3
Z-397 WEB
www.ironlogic.me
State
Display
USB mass storage mode
Slowly blinking red
Lock switch OFF
Solid red
Lock switch ON
Solid green
Power problem
Rapidly blinking red
State
Display
No cable connected
Off
Acquiring IP address
Slowly blinking red
IP address acquired
Solid green
IP address not acquired,
acquisition error
Rapidly blinking red
Receiving data packets
Green flashes
State
Display
No TCP connection on the line
Off
TCP connection on the line
established
Green
Transmit/Receive
Flashes Red/Green
