Copyright 2020 Iron Bow Technologies
8
5.
Gently place the camera assembly on top of the support bracket, ensuring the
locating holes on the base plate line up with the holes on the mounting plate.
6.
There are two sets of holes available for attaching the mounting plate to the
system (see Figure 3 above). The selection of which holes allows the camera
to overhang more at the front or the rear, depending upon how the system is to
be installed:
o
Using the front mounting holes, the camera will overhang more at the
rear of the system, which is ideal for cart, arm or table-top mounting
o
Using the rear mounting holes the camera will overhang more at the front
of the system, which may be more suitable for direct wall mounting of
the system.
Figure 4. Camera Mounting Plate Assembly
4
Figure 5. Mounting Camera to Chassis