Copyright 2020 Iron Bow Technologies
25
Adjusting Audio Level
You can adjust the level of each audio input transmitted from the codec to optimize the
audio experience at the remote end.
To adjust individual audio level inputs, navigate to:
Setup>Configuration>Audio
(Suggested changes and adjustments screen shot is shown on following page)
Microphone 1:
Integrated System Microphone (Default value:18)
Adjust as required
Set Mode to: ON
Set Dereverberation to: OFF
Mode to: ON
Noise Reduction to: ON
Microphone 2:
Electronic Stethoscope Input (Default value:18)
Adjust as required
Set Mode to: OFF
Set Dereverberation to: OFF
Mode to: OFF
Noise Reduction to: OFF
Microphone 3:
Auxiliary Microphone Input (Default value:18)
Adjust as required
Set Mode to: ON
Set Dereverberation to: OFF
Mode to: ON
Noise Reduction to: ON
Following changes to any levels or settings, Select: SAVE