Iron Bow CLINiC 12 Series, Руководство пользователя

Страница: 14 / 32

Copyright 2020 Iron Bow Technologies 14
Getting Started
Powering On and Off
Powering On the CLINiC
Connect the peripherals to the HDMI port(s) of the CLINiC before connecting the
CLINiC to AC power.
To power on the CLINiC:

Connect the CLINiC to AC power. This will automatically power on the codec,
camera, display and control unit of the CLINiC. A splash screen is displayed
within several seconds.

There is a codec power indicator set inside the rear chassis of the system that can
be used to confirm AC connectivity and codec operation, if needed.
Placing the CLINiC in Standby Mode
The system goes into standby mode after two hours with no activity. This value can be
changed from the web interface to the codec (see
Change Standby Settings under CLINiC
Administration).
Waking Up the CLINiC
To wake up the CLINiC:

Press any button on the integrated control panel.

The CLINiC will automatically wake up when an Incoming call is received
Powering Off the CLINiC
Powering off the CLINiC is typically unnecessary. Most video endpoints remain
connected to the network and in stand-by mode until a call is placed or received. If you
need to move the CLINiC to a different location, simply disconnect and re-connect the
AC power, as needed.
Figure 14 – Rear Codec Power Indicator