Copyright 2020 Iron Bow Technologies
17
Managing Video Settings
This section describes how to manage video settings by using the integrated control
panel. For instructions on how to manage video settings please refer to the
Cisco Webex
Codec plus Administrator Guide:
Enabling and Disabling Video Privacy Mode
System Camera Reset Function
Video Privacy
selection stops the image from the system main camera being
transmitted to the remote site. A second selection resumes the camera
transmission.
Video from a connected PC, medical video device, or other
video peripheral will still be shown to local and remote participants.
When
Video Privacy is active, the LED associated with this control will illuminate
Manually moving the pan and tilt position of
the camera while under power will cause a
position detection error and a light on the front
of the camera will blink. The camera will
become unresponsive and remain in Standby
mode until reset. This can occur during
cleaning of the camera, jarring a cart during
movement or a user manually attempting to
reposition the camera by hand.
In this event, the camera can be reset by
selecting and Holding the Video Privacy
control for 5 seconds. The camera will then go
through a short reset routine and resume
normal pan/tilt operation.
