10
■
Drain waste water from the
collecting tank
Turn off the power switch
• When waste water in the collecting tank reaches
the full water mark, stop the machine and turn off
power by moving the power switch to “ (OFF)”.
(OFF)
Remove the collecting tank
•
Remove the tank by pulling it towards yourself
after releasing the two latches from upside and
downside which secure the collecting tank.
Remove the drain cap at the back side of
the collecting tank to drain waste water
from collecting tank
Rinse the collecting tank after finishing
the operation
• Rinse the tank with tap water by pouring water
from the inlet at the back side of the collecting
tank after finishing the operation.
●
If sludge remains in the collecting
tank or inside the vacuum hose,
microorganisms or germs may
breed or develop which could cause
a bad smell.
Close the drain cap as before and attach
the collecting tank to the body
• Close the drain cap by inserting until the end.
Failure could cause a water leak.
How to use
continued
Latch
Collecting tank
Drain cap
Drain cap
