8
How to use
Insert the power plug
●
Be sure to turn the power switch “
(OFF)”
before inserting the power plug into the socket
• Insert the power plug into the socket.
(OFF)
Turn the power switch on (Machine starts).
• Turn power switch to “
(ON)” to turn the power
on.
(ON)
Squeeze the spray lever to vacuum the
water while spraying clean water
• Pull the hand tool toward yourself while putting
the inlet port gently into the dirt.
Inlet port
It there is gap between the
inlet port and dirt, the water
cannot be vacuumed correctly.
• Water could drip for a few seconds after the
spray lever is released.
•
Do not spray water onto the same place
continuously. Vacuum the water immediately
after spraying. If water soaks deep in cloth, it will
remain and cause mold or a bad smell.
Vacuum left water without spraying the
cleaning water
• Pull the hand tool towards yourself while putting
it into the dirt and place the inlet port horizontal.
Dirty water is stored in the collecting tank.
•
If a lot of water remains, it could cause mold or
a bad smell.
• After using the hand tool on fabric on which
water tends to remain, dry it well by blowing air
for a while with a fan.
Turn off the power switch (Machine stops)
•
Turn power switch to “O (OFF)” to power off.
(OFF)
Unplug the power plug
•
Unplug the power plug from the electrical outlet
after using the machine.
●
Be sure to turn the power switch to
“
(OFF)” before unplugging from
the socket.
●
When unplugging the power plug,
be sure to hold the plug to remove it
from the socket, not the power cord.
●
Be sure to unplug the power plug
from the socket after using the
machine. Do not leave the plug
inserted into the socket.
Store the machine with the collecting
tank and clean water tank empty, hand
tool removed
•
Do the recommended maintenance before
storing (
→
P.12)
Spray lever
