11
• Push the collecting tank until it clicks into place.
Click
●
Incorrect installation of the collecting
tank may reduce collecting capability.
• Drain waste water before it reaches the full
water mark. In the case of continued use of
the waste water above the full water mark, the
automatic device to stop vacuuming will activate
to stop the vacuum. In the case of activation of
the automatic device to stop vacuuming, please
drain the waste water from the tank.
*
Float of the automatic device to stop vacuuming
could work before the water reaches the full
water mark due to the air bubble.
●
In the case of water going inside the
body, idling operation is necessary
after removing the hand tool,
vacuum hose, and the collecting
tank.
■
Drain any water left in the
clean water tank
Remove the vacuum hose from the hand
tool by turning it counterclockwise
Open the cap of the clean water tank to
drain the water by pointing the inlet port
down
Vacuum hose
Hand tool
Cap
Inlet port
Automatic
device
to stop
vacuuming
Float
Full water
mark
