Black
IC-SLDC7
EN
17
Troubleshooting
No power
(Not working)
●
Dead battery
●
Charge the battery by using the battery charger
attached to the body.
➡
➡
●
The remaining power is low
●
Charge the battery by using the battery charger
attached to the body.
➡
➡
●
Please completely close the dust bag cover.
●
The dust bag cover is not com-
pletely closed
➡
➡
Weak suction
●
Dust accumulated in the dust
bag
●
Please clean up the dirt.
➡
➡
●
The sponge filter is blocked
●
Be sure to install a sponge filter.
➡
➡
●
Dust gets stuck in the suction
head and the extension pipe
●
Please clean the suction head and the extension
pipe.
➡
➡
Weak suction,
high operating
noise
No dirt is in-
haled, but the
dust sensor
indicator is red
●
Dust on the dust sensor
●
Please clean the dust sensor.
➡
➡
Dust sensor in-
dicator doesn't
light up green
●
Used on carpets or bedding
●
The red light remains illuminated because it
detects the house dust and loose hairs that has
accumulated inside.
➡
➡
Dust sensor in-
dicator doesn't
light up red
●
If the suction head and the ex-
tension pipe is not installed, the
external light enters the dust
sensor, which can easily cause
incorrect operation
●
If it keeps malfunctioning, install the suction
head, extension pipe, etc. and then try using
again.
➡
➡
The color of
the dust sensor
indicator has
changed, but the
suction power
has not
●
Running in normal or turbo
mode
●
In normal or turbo mode, no matter what color
the dust sensor indicator light is, it operates in
this mode. To adjust suction power according
to the color of the dust sensor indicator, run in
automatic mode.
➡
➡
When in opera-
tion, the suction
power is strong
and weak
●
Running in automatic mode
●
In automatic mode, combine the color of the
dust sensor indicator to change suction power.
➡
➡
State
Cause
Measures
Please confirm the following problems after reading the operation manual carefully before you entrust to repair it.
