Black
IC-SLDC7
EN
12
Press the button and select the operating mode
• Operation will begin in the selected mode.
Automatic mode
• Press the
Automatic mode
button to start running in Auto-
matic mode.
• In automatic mode, suction power will be adjusted
according to the amount of dust detected by the dust
sensor.
Quantity
of dust
Dust sensor indicator light
Suction
power
When the
quantity
is large
Red light
High
When the
quantity
is small
Green light
Low
※
When used on carpets and bedding, it possibly
continuously increases the suction power because
it detects the house dust and loose hairs that has
accumulated inside.
Normal/Turbo mode
• Press the
Normal/Turbo
mode button to start run-
ning in normal mode. Press the
Normal/Turbo
mode button again to switch to turbo mode.
※
Each time you press the
Normal/Turbo
button, the
normal and turbo modes are switched.
• Dust sensor indicator is also ON in the
Normal/Tur-
bo
mode. Switch the
Normal/Turbo
based on the
indicator color.
※
To adjust suction power according to the color of
the dust sensor indicator, run in automatic mode.
Operation instructions
Start cleaning
Floors, etc.
• Use the suction head to move slowly forward and
backward as it sucks in dust.
• When cleaning the tatami, move the suction head
along the tatami grid.
When cleaning is finished, press the OFF
button
• The product will stop.
