Black
IC-SLDC7
EN
15
Remove the sponge filter
• Grasp and pull out the sponge filter from the stor-
age section of the dust bag.
Wash the sponge filter with water
• After cleaning, please wring and fully dry.
Install the sponge filter
• Please use a screwdriver to insert the whole
sponge filter into the storage section of the dust
bag to avoid leaving gaps.
Install the dust bag unit and close dust
bag cover
• Refer to “dirt disposal” on page 14 Install the dust
bag unit and close the outer cover.
●
Install the sponge filter after fully drying it.
●
Be sure to install a sponge filter, otherwise it may
cause failures.
Suction head
When the dust is obvious
•
• Remove any tangled hair or lint on the
Remove any tangled hair or lint on the of bottom
of bottom
with
with tweezers.
tweezers.
• When dust gets stuck inside the suction head, the
suction power decreases.
Check regularly and remove trash with tweezers or
splints if the trash gets stuck.
Dust bag fastener
When the dust is obvious
• If the pack holder is dirty, wash it with water and
dry off thoroughly.
Wash with water
Sponge filter
About every three months
Remove the dust bag unit
• Refer to “Dirt disposal” on page 13 to remove the
dust bag unit.
Dust bag unit
