Black
IC-SLDC7
EN
14
Cleaning and maintenance
●
When cleaning and maintaining the de-
vice, please stop the operation, remove
the product from the charger.
●
Please do not spray water. Failure to do so
may result in electric shock, injury or failures.
●
Do not clean the device with detergent, water, gaso-
line, bleach, etc..
●
Do not use chemical rags.
The body, extension pipe and the outside
of the suction head
About once a week
• Please fully wring out the damp cloth with cool or
warm water (40
℃
and below) before using, and
wipe off the dust on the product.
• If there is a stubborn stain, please spot test with
a piece of cloth that is damp with a little neutral
cleaner, and then use a dry cloth to wipe it off.
Suction head
Body
Extension pipe
Dust sensor
About once a week
• Open the dust bag cover, take out the dust bag set,
roll a napkin onto a cotton swab or finger and wipe
the sensor on the left and right inside the air intake.
• If dust adheres to the sensor, it may cause opera-
tion errors. Please clean it regularly.
Right sensor
Left sensor
Install a new dust bag
• Completely insert the disposable dust bag into the
buckle root of the 4 parts of the fastener.
※
Install a disposable dust bag before use.
※
Do not force open the buckle.
Install the dust bag group on the body
• Directly insert from the top into the original location.
※
Push the disposable dust bag into the inner part to
avoid trapping it in the outer cover of the dust bag.
Close the dust bag cover
• Please lock in place until you hear a click.
Dust bag cover
※
When the dust bag unit has not been installed correct-
ly, the outer cover of the dust bag cannot be closed.
Buckle
Completely insert the
disposable dust bag into
the buckle root
.
Operation Instructions
Continued
