Installation
This section contains detailed instructions for installing the camera. These instructions assume that the installer has a good
knowledge of installation techniques and is capable of adopting safe installation methods.
Dimensions and Views
Fixing Plate
Use the fixing plate as a drilling template before fixing to the base of the camera using fixing screws ( Item 3 ).
IMPORTANT!
Before drilling any holes take care to ensure there are no cables, conduits, pipes etc behind the drilling surface.
Be sure to site your camera so that it covers all desired areas and does not foul any doorways or become a hazard in
walkways etc.
Allow sufficient space behind the drilling surface for the umbilical cable and it’s connector.
To extend the cables back to the monitor (or switcher, or recorder), joystick and power source please use the following
cables:
• Power: IM-POW-xx from Iris Innovations, from Iris Innovations, where xx is the length of cable in meters in multiples of 5.
• Video: IM-BNC-xx from Iris Innovations, from Iris Innovations, where xx is the length of cable in meters in multiples of 5.
• Data: IM-JOY-xx from Iris Innovations, from Iris Innovations, where xx is the length of cable in meters in multiples of 5.
• Combined Cable: IM-COMB-PTZ-xx from Iris Innovations, where xx is the length of cable in meters in multiples of 5.
Iris Innovations
IM-PTZ-16-INST-DOCv1.1
5
SWITCH 1
SWITCH 2
Cable Entry
