Iris Innovations IM-PTZ-16, Быстрое руководство

Страница: 7 / 9

Dip Switch Settings
Before the camera is fixed into place and operated, set the appropriate camera address, protocol and baud rate. This is
done via a bank of dip-switches located underneath a removable cover plate on the under side of the camera (see drawing
on page 5 above and illustration below).
SWITCH BANK ONE: Camera Address Settings
SWITCH BANK TWO: Baud Rate, Protocol and Fixed Image Flip (Upside Down Mode)
Iris Innovations
IM-PTZ-16-INST-DOCv1.1 6
Camera Address
SW1 SW1 SW1 SW1 SW1 SW1 SW1 SW1
Camera Address
1 2 3 4 5 6 7 8
0 OFF OFF OFF OFF OFF OFF OFF OFF
1 ON OFF OFF OFF OFF OFF OFF OFF
2 OFF ON OFF OFF OFF OFF OFF OFF
3 ON ON OFF OFF OFF OFF OFF OFF
4 OFF OFF ON OFF OFF OFF OFF OFF
… … … … … … … … …
253 ON OFF ON ON ON ON ON ON
254 OFF ON ON ON ON ON ON ON
255 ON ON ON ON ON ON ON ON
Switch bank One
Switch bank Two
SW2 SW2 SW2 SW2 SW2 SW2 SW2 SW2 SW2
SW Position 1 2 3 4
Protocol
ON OFF OFF OFF User User User User
Protocol
OFF ON OFF OFF PELCO-P PELCO-P PELCO-P PELCO-P
Protocol
ON ON OFF OFF PELCO-D PELCO-D PELCO-D PELCO-D
Protocol
OFF OFF ON OFF Reserved Reserved Reserved Reserved
Protocol
ON OFF ON OFF Reserved Reserved Reserved Reserved
Protocol
OFF ON ON OFF Reserved Reserved Reserved Reserved
SW Position 5 6 7 8
Baud Rate (BPS)
1200 1200 1200 1200 ON OFF OFF -
Baud Rate (BPS)
2400 2400 2400 2400 OFF ON OFF -
Baud Rate (BPS)
4800 4800 4800 4800 ON ON OFF -
Baud Rate (BPS)
9600 9600 9600 9600 OFF OFF ON -
Baud Rate (BPS)
19200 19200 19200 19200 ON OFF ON -
Baud Rate (BPS)
Reserved Reserved Reserved Reserved OFF ON ON -
Image Flip
Desktop Installation Desktop Installation Desktop Installation Desktop Installation - - - OFF
Image Flip
Reverse Installation Reverse Installation Reverse Installation Reverse Installation - - - ON