Iris Innovations IM-DVR-04, Руководство пользователя

Страница: 33 / 147

4.1 Text Input
There are certain circumstances that the system requires the user to enter text, such as
system login, camera title setup, and so on. Please use the remote controller and
follow the steps below to enter text:
(1) Press ENTER to edit the highlighted option. The flashing cursor will be shown to
indicate the editing point.
(2) Press ◄► to move the cursor to the left/right.
(3) Press code in text editing mode to change text case. (If this entry can accept
number only, pressing code will have no effects.) Indicators on the screen show
the current setting:
123 = Number only
abc = No capital letters
ABC = All capital letters
CODE = Internal code for the selected language, such as Chinese, Japanese, etc.
(4) Press a number key ( 1-9, 0 ) repeatedly until the character you want appears. ( 1
for 1 or space, 2 for 2, a/A, b/B, or c/C, etc.) If internal CODE is selected, a
CODE line will be added (after the first code is entered) for each new code to be
entered. Please check the internal code table for the selected language. For 2-
byte code, e.g. Chinese or Japanese, the code accepted is from 0000 - FFFF.
(5) Press mark to bring up a list of punctuation marks and special characters. The
highlighted character in the list shows the selected one. Press ▲ ▼◄► to
change the selection.
(6) If you make a mistake, press BS to remove the character to the left of the cursor,
or press DEL to delete the character at the current cursor position.
(7) In text editing mode, internal code box, and mark list, press ENTER to exit and
save changes, press ESC to exit without making changes.
Note: If the user clicks on the left button of the mouse on the item, a Keyboard
Simulator will be shown. Click on ‘#’ (or “abc”, ..) to change text case. Click
on the alpha-numeric characters to enter text (or CODE). Click on ‘*’ for
mark .
33