23
24
22. BASIC INSPECTION/MAINTENANCE
It is recommended to carry out a technical inspection every time
before use.
Please check the following:
The CABIN’s appearance, there should be no cracks in the body,
or visible damage.
The condition of the objective lens and eyepiece, there should
be no cracks, greasy spots, dirt or other deposits on the lenses.
The rechargeable battery should be fully charged.
The controls/buttons should be in working order.
Basic Maintenance
Basic maintenance should be carried out at least twice a year
and includes the following steps:
Wipe the external surface of metal and plastic parts off dust with
a cotton cloth.
A blast of air may also be used for the cleaning process.
Clean the electric contacts and battery slots on the CABIN using
a non- greasy organic solvent.
Check the optics of the lens and the eyepiece. If necessary,
remove any dirt and sand from the optics. It is preferred to use a
non-contact method such as a quick blast of air.
Cleaning of the exterior of the optics should be done with
cleaners designed especially for this purpose, such as an optical
quality wipe.
23. WARRANTY
At iRayUSA we’re first and foremost hunters and users of our
products and we understand that failure isn’t an option. We also
understand that having to wait extended periods for repair isn’t
something that a customer should have to put up with when
something does go wrong. During your published warranty
period, iRayUSA will repair or replace, at its discretion, any
optic that becomes defective during normal use. Additionally, if
we cannot fix your optic in less than one week, we will offer to
replace it with a replacement product in like or better condition.
If you would rather wait for your specific optic to be repaired, we
can handle that too.
We know you’ve never seen this from a thermal manufacturer,
neither have we, and that’s why we started iRayUSA.
Our warranty follows the product, and is not tied to the original
owner. The warranty period is tied to the date of sale to the
dealer. This warranty only covers normal use and does not cover
cosmetic damage, normal wear, intentional damage, theft, loss,
any act of God or a condition caused by use other than intended.
Any product that is modified, opened or tampered with will void
any warranty coverage. Any serial number damage or alteration
on the product will be considered modification.
Please give us a call at
800-769-7125,
visit
irayusa.com/warranty
[email protected] with any questions.
This warranty gives you specific legal rights, and you may also
have other rights which vary from state to state. One week starts
from the time of receipt of product at iRayUSA. Customers must
ship the product to iRayUSA, iRayUSA will return the product at
no cost. No returns will be accepted without an RMA. iRayUSA is
not liable for any damages or loss incurred when shipping
to iRayUSA.
24.
FCC INFORMATION:
FCC ID 2AYGT-CABIN
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by IRayUSA
could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device was tested for typical body-supported operations and
use. Third-party belt-clips, holsters, and similar accessories used
by this device should not contain any metallic components. Body
accessories that do not meet these requirements may not comply
with RF exposure requirements and should be avoided. Use only
the supplied or an approved antenna.
CAUTION
Содержание Cabin Series
Страница 16: ...27 28 NOTES...
Страница 17: ...29 30 NOTES...
