iRay Technology Cabin Series, Руководство пользователя

Страница: 5 / 18

5 6
6. BATTERY AND SAFETY
The CABIN is supplied with a quick-change IBP-2 Li-Ion battery
pack which enables the device to be used for up to 6+ hours. The
battery should be fully charged before the first use.
Charging the battery with USB-C Port
Install the Battery Pack into the Battery Compartment. For details,
see Battery Pack Installation.
Connect the USB-C end (18) of the Data Cable to the USB-C port
(4) of the Product.
Connect the USB end of the Data Cable to a USB Power Socket
or power pack with an output voltage not exceeding 5V.
After the battery is fully charged, remove the Battery Pack from
the Battery Charger.
Note: The IBC-2 Battery Charger can charge two IBP-2 Battery
Packs at the same time.
Battery Pack Installation
Open the Puller on the Battery Pack (14) and align the Orange
Line on the Battery Pack (D) with the Orange Line on the Battery
Slot (C) and push the Battery Pack (13) into the Battery Slot (21).
When the Battery Pack is completely inserted into the Battery
Slot turn the Puller
(14) clockwise to lock the Battery Pack.
Close the Puller (14) and the Battery Pack is completely installed.
Safety Measures
Use only the IBC-2 Battery Charger to charge the IBP-2 Battery
Pack. Any other use will cause irreparable damage to the Battery
Charger or Battery Pack and or cause a fire.
IMPORTANT: Before any length of storage, the Battery Pack
should be partially charged - not fully charged or discharged.
Do not charge the battery immediately after you bring it from a
cold area to a warm area. Wait 30 to 40 minutes for the battery
to warm up.
Do not use the charger if it is modified or damaged.
The device should be charged at a temperature of 32°F to 115°F,
otherwise the battery life will be significantly reduced.
When charging, don’t leave the battery or charger unattended.
Do not expose the battery to high temperature or open flame.
Do not immerse the battery in water.
The IBC-2 Battery Pack has short circuit protection, but situations
that may lead to short circuits should be avoided.
Do not charge the battery for more than 24 hours after it is fully charged.
Do not drop, attempt to disassemble or modify the IBC-2 Battery Pack.
The intended operating temp of the battery is -4°F to 122°F, It
should not be used beyond this range as it may shorten the life of
the battery.
When the device is used in sub-zero temperature the battery
capacity will drop, this is normal and does not indicate a defect.
Keep the battery pack out of the reach of children.
Charging the battery with the IBC-2 Power Adapter
Align the Positioning Block
of the Battery Pack
(A) with
the groove of the Battery
Holder (
B), and insert the
Battery Pack (13) into the
Battery Charger (15).
Connect the USB-C end of
the USB Cable
(18) to the
USB-C port of the Battery
Charger
(15).
Connect the USB end of the
USB Cable
(18) to a USB
adapter or power bank to
charge the Battery Pack.
The LED Indicator on the
Battery Holder (
17) will now
light up or blink:
LED INDICATOR BATTERY CHARGE STATUS
Battery Charging Capacity 1%-25%
Battery Charging Capacity 25%-50%
Battery Charging Capacity 50%-75%
Battery Charging Capacity 75%-99%
Fully Charged