IR-Link ZiLog, Руководство пользователя

Страница: 22 / 27

21
6.6 INTERNAL MEMORY
ZiLog has about 60MegaBytes internal volatile memory. Because the memory is volatile,
left memory in internal memory is disappeared when the power is turned off besides total
size of recording file become over 60MegaBytes, recording is finished. And then when the
next call is coming, ZiLog delete all existing all data to retain room for the next call.
Therefore, if there is no choice but to save recording file in internal memory, move the
recording file to USB memory to preserve it as soon as possible. After inserting USB flash
memory, check if green LED is on and push button for 4seconds until LED gets off. Then
recording files which is left in internal memory is moved to USB flash memory.
6.7 RECORDING CAUTION
* July 1, 2012 currently ZiLog supports G.711, G.723, G.729 CODEC so the other CODECs
are not supported.
* ZiLog does not support recording for telephone conversation.
6.8 ERROR AND COUNTERMEASURE
* Left side blue LED keeps blinking over several minutes after rebooting.
- Recheck DHCP setting of router and LAN cable’s connection or confirm if DHCP server
is working well because this means IP address is not being acquired from DHCP server,
* Blue LED stops its blinking and the LED in the middle keeps off.
- Reboot VoIP phone. This means ZiLog could not acquire VoIP’s information because
ZiLog can be ready for recording after acquiring VoIP phone’s information. After
rebooting, VoIP information is acquired and then red LED in the middle turns on.
* Although call starts, LED in the middle does not keep blinking.
- First, check if blue LED stops blinking and keeps on and then check if red led keeps on
for AUTO mode. Even though it is AUTO mode, recording does not start, the VoIP phone
information ,which ZiLog already acquired, may be the other VoIP’s imformation.
Check if ZiLog is connected to VoIP phone one-to-one. If you use hubs, until ZiLog can
become a status that can record, don’t connect other VoIP phone to the hub.
* During recording, LED in the middle keeps blinking but green LED does not keep
blinking.
- This occrus when writing data in USB flash memory fails. First check whether USB