PenCam Recorder
www.swannsecurity.com
9. Technical Specifications
7. Changing the Date & Time
8. Miscellaneous Features
Quick Start Guide
SW234-PC2
SW234-PCG
STOP
STOP
If this product does not work when you first plug it in or you have any
concerns, don’t take it back to the store!
Use this Quick Start Guide or
Visit www.swannsecurity.com/help
Contact our expert Tech Support Team...
United States
* 1-800-627-2799
Sun 2pm-10pm, Mon-Thurs 6am-10pm
Fri 6am-2pm (PT)
Australia
*
1300 138 324
Mon 9am-5pm, Tues-Fri 1am-5pm
Sat 1am-9am (AET)
New Zealand*
0800 479 266
Mon 11am-7pm, Tues-Fri 3am-7am
Sat 3am-11am (NZST)
International*
+61 3 8412 4610
*Hours vary during daylight savings times. Consult www.worldtimeserver.
com for the current Melbourne, Australia time
has the answers
Video
Video Format:
AVI
Resolution:
352 x 288
Video File Size:
>500KB per min
Recording
Recording Mode:
Manual Recording, Continuous
Record Time:
Up to 3 Hours
Audio Recording:
Yes
Audio Range:
1m (3ft)
General
Operating System:
Windows XP, Vista
Internal Memory:
2GB or 4GB
Backup Type:
USB
Battery Type:
Rechargeable Lithium-ion
Charging:
USB adapter Cable
Battery Charge:
Approximately 90 mins
Dimensions:
150mm x 15mm x 15mm
5.9” x 0.6” x 0.6”
Weight:
30g,
1oz
Follow these steps to set the date and time
1. Connect the PenCam to your PC
2. Create a .txt file with Windows Notepad
3. Type the date & time in the following format
yyyy-mm-dd hh:mm:ss, ex. 2009-12-30 12:34:56
(year, month, day, hour, minutes, seconds)
4. Save the file as
setdate.txt
and place in the root
directory of the PenCam
5. Remove from the computer and turn on the PenCam
NOTE:
setdate.txt
is a case sensitive file and must be named
exactly as shown
The PenCam can be used as a USB removeable storage disk
If the PenCam locks up, use a pin and push the reset button
Software can be downloaded from www.swannsecurity.com
FCC Verifi cation:
NOTE:
This equipment has been tested and found to comply with the limits
for Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
· Reorient or relocate the receiving antenna
· Increase the separation between the equipment and the receiver
· Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected
· Consult the dealer or an experienced radio/TV technician for help
IMPORTANT: Prohibition against eavesdropping.
Except for the operations of law enforcement officers conducted under lawful authority,
no person shall se, either directly or indirectly, a device operated pursuant to the provi-
sions of this Part for the purpose of overhearing or recording the private conversations
of others unless such use is authorized by all of the parties engaging in the conversation.
SR234-PC2-10006-180809
