IR-Link ZiLog, Руководство пользователя

Страница: 7 / 27

6
4.
Setting
4.1.
Network
You can configure your network with two ways like above. Your device and VoIP phone
belong to the same network in bridge mode, which is default setting, and your device
works like a hub.
Your device and VoIP phone belong to the different network in NAT mode. In other
words, VoIP phone connects to Internet through your device and it is allocated private IP
address by your device. In this case, the device works like a router.
In the case that you connect ZiLog to a existing VoIP phone already being used, because
composition of the network can be changed, reboot VoIP phone after you turn off and on
ZiLog connected to VoIP phone. ZiLog should be connected to VoIP phone in series
without any switches or hubs.

What is NAT feature?
Your device supports NAT(Network Address Translation) feature which makes several
deveices connect to Internet with only one public IP address. In NAT mode, your device
is connected to the public area directly and VoIP phone is connected to your device.
4.2.
Web Setting
This section provides you how to set up your device using web browser and how to check
setting information.