3
components are easily broken if the machine is moved in an improper way.
Before you move the machine, disconnect all external connections and
separate all topple preventing machines. Move the machine carefully to
prevent it from being hit or squeezed, especially the screen, which may
cause injury if broken
Do not cover or block up any vents on the machine.
Any overheated components may cause fire, damage the machine, and
shorten the service life.
Do not lay the machine down in a way where the venting surface will be
covered.
Do not install the machine on carpet or cloth.
Do not use a cloth, such as table cloth, to cover the machine
Keep the machine away from the radio.
The machine complies with the international EMI standard to pervent radio
interference. However, interference may still exists and causes noise in the
radio. If noise occurs in the radio, try the following solutions.
Adjust the direction of the radio antenna to avoid the interference from the
machine.
Keep the radio away from the machine.
Do not damage the power cable.
Do not damage, change, twist, bend, or forcibly drag the power cable.
Do not put weights (such as the machine itself) on the power cable.
Do not forcibly drag the cable when you pull out the power plug. If the
power cable is damaged, please contact the local distributor to repair or
replace it.
The power cable in the accessory box is for this machine only, do
not use it on other machines.
Use the battery correctly.
Galvanic corrosion, electric leakage, and even fire may be caused by
improper battery usage.
It is recommended to use the designated type of battery and install the
battery by the correct electrodes (positive and negative).
Do not install and use a new battery with a used one.
Take out the battery if the remote control is not used for a long period.
Do not expose the battery to overheated environments, such as sunlight or
heat sources.
Dispose of the used battery based on your local regulations.
Содержание IQTouch HC900Pro
