background image

iQ426

HEPA

Operator’s Manual

888-274-7744

www.iqpowertools.com

En

gli

sh

SAFETY

PERSONAL PROTECTIVE EQUIPMENT

You must use approved personal protective equipment 

whenever you use the machine. Personal protective 

equipment cannot eliminate the risk of injury but it will 

reduce the degree of injury if an accident does happen. 

Listen out for warning signals or shouts when you 

are wearing hearing protection. Always remove your 

hearing protection as soon as the motor stops.

 Always use approved eye protection

 

• If you use a face shield then you must also 

 

  wear approved protective goggles. Approved 

 

  protective goggles must comply with standard  

 

  ANSI Z87.1 in the USA or EN 166 in EU  

 

  countries.  

 

  Visors must comply with standard EN 1731.

Recommended Personal Protective Equipment:

 

• Hearing protection

 

• Breathing mask

 

• Protective gloves.

 

• Hair covering or devices to contain long hair 

ALWAYS THINK ABOUT YOUR WORK ENVIRONMENT 

AND USE COMMON SENSE.

It is not possible to cover every conceivable situation 

you can face. Always exercise care and use your 

common sense. If you get into a situation where you 

feel unsafe, stop and seek expert advice. Contact your 

dealer, service agent or an experienced user. Do not 

attempt any task or operation that makes you feel 

unsure whether or not it is safe.

MACHINE USE AND CARE

 

• The machine is designed for vacuuming and 

 

   separating dry, non-combustible dust with 

 

   an explosion limit value of >0.1mg/m3. Do not 

 

   use the product for other tasks.

 

• Do not pick up anything that is burning 

 

   or smoking, such as cigarettes, matches 

 

   or hot ashes.

 

• Do not use to pick up flammable or 

 

   combustible liquids, such as gasoline, or 

 

   use in areas where they are present.

 

• This machine is designed for picking up  

 

   dry, non-flammable dust and debris in an  

 

   indoor environment. It is not suitable for  

 

   picking up liquids.

 

• Do not pick up any type of liquids.

 

• Do not allow a build-up of dust, hair and  

1.3

GENERAL SAFETY PRECAUTIONS

This section describes basic safety directions for using 

the machine. This information is never a substitute for 

professional skills and experience.

 

• Please read the operator’s manual carefully

 

   and make sure you understand the instructions  

 

   before using the machine. Save all warnings    

 

   and instructions for future reference.

 

• Keep in mind that the operator is responsible  

 

   for accidents or hazards occurring to other    

 

   people or their property.

 

• All operators shall be trained in the use 

 

   of the machine.

WORK AREA SAFETY

 

• Keep work area clean and well lit. Cluttered or  

 

   dark areas invite accidents.

 

• People and animals can distract you causing

 

   you to lose control of the machine. For this

 

   reason, always remain concentrated and  

 

 

   focused on the task.

 

• Do not use the machine in bad weather such 

 

   as dense fog, heavy rain, strong wind, intense  

 

   cold, etc...

 

• Never start to work with the machine 

 

   before the working area is clear and you 

 

   have a stable work surface.

PERSONAL SAFETY

Never use the machine if you are fatigued, while under 

the influence of alcohol or drugs, medication or anything 

that could affect your vision, alertness, coordination 

or judgement.

 

• Check that no tools or other objects have been  

 

   left lying on the machine.

 

• Never allow anyone else to use the machine    

 

   without proper training.

 

• Always shut off the machine during remove 

 

   work breaks.

 

• Never work alone, always ensure there is  

 

 

   another person close at hand.

 

• Learn how to use the machine and its controls  

 

   safely and learn to how to stop quickly. 

 

   Learn to recognize the safety decals.

 

• Keep handles dry, clean and free from 

 

   oil and grease.

 

• Do not overreach. Keep proper footing and    

 

   balance at all times.

 

• Never stand on the machine.

Содержание iQ426HEPA




























Отзывы: